Fold Rollers Do Not Rotate - Horizon Fitness PF-P330 Manual

4: Mechanical Troubleshooting
4-6

Fold Rollers Do Not Rotate

Checking the fold roller rotating
- Remove the rear cover.
- Turn OFF the power switch. Keep pressing the [5]
button on the numeric key pad and turn ON the
power switch. The blower, valve, clutch and table
Up/Down motor repeat the cycle of feeding opera-
tion. (To stop, turn OFF the power switch.)
Drive belts are installed incorrectly.
M01
Drive Motor
Tension
Check the followings:
1. The drive timing belts are installed and work
correctly.
2. The fixing screws on the timing pulley are fully
tightened.
3. The tension presses the belt correctly.
Drive motor M01 does not drive
X10 Q03 X12
2A
S00
X11
SSR
K02
1 2
Fold
Rollers
Check the followings:
1. The circuit protector Q03 for M01 is not
actuated.
2. The fixing screws on timing pulley of the M01
are fully tightened.
3. The voltage on the SSR terminal Pin2 and
BL connector X11 is 115/230VAC.
4. Wiring and connection between S00 - M01
(shown above) is OK.
4-6: Fold Rollers Do Not Rotate
4
Mechanical Troubleshooting
Capacitor
M01
1 1
2 2
4-7