Level 2 Reset - iDirect Evolution X7 Installation, Support, And Maintenance Manual

Level 2 Reset

F.3 Level 2 Reset
Level 2 reset provides a means of returning the router to factory default settings.
NOTE: This reset must not be used unless there is an intent to reconfigure or
reload the software and options. There is no recovery once this reset occurs. New
options file, software, and configuration must be loaded with Web iSite once this
reset has been initiated.
Level 2 reset features:
• Initiated by: Pressing the reset button and keeping it pressed for more than 15 seconds,
see Section 3.3, X7 Router Rear Panel Description on page 10
location
• Intended for recovery of modem, only, and new options file, configuration, and software
must be loaded
• Router boots with factory default image (default options file, software, and passwords),
access to Web iSite is available at 192.168.0.1
• Recovery: none - reload software, options file, configuration
• Router rear LEDs: BUC PWR LED (see callout #9,
green when the reset button is held for greater than 15 seconds
46
for the reset button
Table 3-3 on page 11) will turn solid
Installation, Support, and Maintenance Guide
Evolution X7 Satellite Router