Lighting (Optional) - Dräger Movita Instructions For Use Manual

Operation
Docking the MOVA Cart Evita Docking
equipment cart

Lighting (optional)

WARNING
Danger of overheating
The support arm can overheat if objects are
placed on the support arm in the area of the
light fittings.
Do not place objects on the support arm.
WARNING
Risk of personal injury
If the light fittings in the supply unit have not
cooled down sufficiently, burns may be
caused during maintenance work.
Make sure that the light fittings have cooled
down sufficiently.
30
A
1 Push the equipment cart until it automatically
clicks into the media column.
 The equipment cart can now be moved together
with the ceiling supply unit.
 If the equipment cart does not automatically
click in, pull the unlock button (A) and push it
towards the media column again.
Undocking the MOVA Cart Evita Docking
equipment cart
1 Pull the unlock button (A) and pull the
equipment cart away from the media column at
the same time.
2 Release the unlock button (A) again.
CAUTION
Risk of device malfunctions
To properly use the supply unit, read and comply
with the instructions for use for the lighting control
unit.
Indirect interior lighting
The ceiling supply unit can be equipped with an
indirect interior light (A) and/or floor lighting (B),
depending on the version.
NOTE
The indirect ceiling light is equipped with a white
bulb.
Instructions for use Movita