Advertisement
How To's
Engage™ and Inspire™ Consoles
REPLACEMENT OF 15-INCH LCD ASSEMBLy
1. Remove the rear console case.
2. Disconnect these cables: Touch screen tail from
the SBC, backlight cables from the inverter,
headphone, USB, and iPod cables from the
Option Panel Assembly. Cut cable ties as needed.
remove the overlay/bezel assembly.
3. remove the two screws that hold the 15" Touch
Screen Assembly to the PCB Mounting Bracket
Assembly.
4. remove the four screws (shown in the illustration)
that secure the 15" LCD to the PCB mounting
bracket assembly.
5. Disconnect the red/black/white cable (AK65-
00061-0000) at the LCD. route the backlight
wires through the hole in the PCB mounting
bracket assembly.
6. Install the new 15" LCD and existing Touch Screen
in reverse order using the hardware removed and
saved in the previous steps.
7. reconnect all cables, touch screen tail, etc.
Mounting
Screws (4)
15" Touch Screen
Assembly
CN 37
M051-00K70-B111
PCB Mounting Bracket
Assembly with LCD
39
Hide quick links:
Advertisement
