Installing The Ups (Ax100 Only) - Dell EMC2 AX100 Series Installing Manual

Installing the UPS (AX100 Only)

Installing the UPS (AX100 Only)
Before You Start
Install a UPS in a Cabinet
AX100-Series - Installing a Fibre Channel Storage System with a Direct Connection to a Solaris Server
18
Read this section if you are installing a new AX100 (dual-SP) storage
system.
You install the storage system and the uninterruptible power supply
(UPS) in a 19-inch NEMA-standard cabinet/rack. The UPS is for
dual-SP storage systems only.
To complete this procedure, you need a UPS and the cables and the
mounting kit that shipped with it.
1. Unpack the UPS and save the packaging.
2. Install the UPS in the cabinet, as described in the documentation
provided with the UPS.
CAUTION
!
The UPS ships with the battery cable disconnected. Be sure to
connect this cable firmly when you install the UPS. If this cable is
not securely connected, the Replace Battery light turns on.