Chapter 2: Removing And Installing Components; Recommended Tools; Screw List - Dell Latitude 3440 Service Manual
Hide thumbs
Also See for Latitude 3440:
- Owner's manual (57 pages) ,
- Setup and specifications (25 pages) ,
- Setup and specifications manual (23 pages)
Table of Contents
Advertisement
Removing and installing components
NOTE:
The images in this document may differ from your computer depending on the configuration you ordered.
Recommended tools
The procedures in this document may require the following tools:
● Phillips screwdriver #0
● Phillips screwdriver #1
● Plastic scribe
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Base cover
Battery
M.2 solid-state drive
Wireless-card
WWAN
Fan
Display assembly
I/O board
Screw type
Captive
Captive
M2x2
M2x3
M2x3
M2x3
M2.5x5
M2.5x5
M2x5
M2x3
Quantity
9
5
1
1
1
2
4
2
2
1
Removing and installing components
Screw image
2
11
Advertisement
Table of Contents
