Dell EMC2 AX100 Series Installing Manual page 23

Figure 5
AX100-Series - Installing a Fibre Channel Storage System with a Direct Connection to a Solaris Server
WARNING
The equipment is heavy and should be installed into a rack by two
people. To avoid personal injury and/or damage to the equipment, do
not attempt to lift and install the unit into a rack without a
mechanical lift and/or help from another person.
4. From the front of the cabinet, slide the storage system onto the
rails so that the cutouts in the rear of the chassis fit into the tabs
on the back of each rail (Figure 5).
If the chassis does not slide all the way into the cabinet, you may
need to further loosen the screws that hold the rear of the rails in
place, then adjust the rail to allow the tabs to fit into the cutouts.
Sliding the Chassis into the Cabinet
5. Use the four latch bracket screws to secure the storage system and
latch brackets to each front channel (Figure 6).
Installing the Storage System
EMC2799
23