To Reset the Storage System
Figure 18
AX100-Series - Installing a Fibre Channel Storage System with a Direct Connection to a Solaris Server
1. After shutting down the storage system, wait about two minutes
for the storage system to power down.
2. Press the power button and hold it down for one second after the
green Power light comes on (Figure 18) - a total of about four to
five seconds.
SP B
FE 0
FE 1
Power On/Off Button
Storage-System Power Button and Light (LED)
Rear (AX100)
FE 0
FE 1
Power LED
Initializing the Storage System
SP A
EMC2928e
49