Dell EMC2 AX100 Series Installing Manual page 70

Verifying Your Configuration
What Next?
Copyright © 2004-2005 EMC Corporation. All Rights Reserved.
EMC believes the information in this publication is accurate as of its publication date. The information is subject to
change without notice.
THE INFORMATION IN THIS PUBLICATION IS PROVIDED "AS IS." EMC CORPORATION MAKES NO
REPRESENTATIONS OR WARRANTIES OF ANY KIND WITH RESPECT TO THE INFORMATION IN THIS
PUBLICATION, AND SPECIFICALLY DISCLAIMS IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.
Use, copying, and distribution of any EMC software described in this publication requires an applicable software
license.
Trademark Information
2
EMC , EMC, CLARiiON, Navisphere, and PowerPath are registered trademarks and Access Logix, FLARE, MirrorView, SAN Copy, and SnapView are
trademarks of EMC Corporation.
All other trademarks mentioned herein are the property of their respective owners.
AX100-Series - Installing a Fibre Channel Storage System with a Direct Connection to a Solaris Server
70
You have completed the installation for one storage system connected
to one server. If you have another server to connect to the storage
system, start with Installing HBAs in the Server
another storage system to connect to a server, start with
Unpacking the Storage System
system
Installing the UPS (AX100 Only)
system
Connecting the Storage System to the Server
storage system
(page 6). If you have
(page 19) for a new AX100SC storage
(page 18) for a new AX100 storage
(page 50) for an existing