Lifting Skyjack Sj643 Th & Sj843 Th - Skyjack SJ643 TH Operating Manual

Section 6 – Additional Procedures
6.2 Lifting Skyjack SJ643 TH
& SJ843 TH
1. Fully retract and lower boom.
2. Turn ignition switch to the off
Remove the key.
3. Block the rear axle by placing wood between the
frame and the axle.
Lifting Point
216201ADA
78
Use rigging with load capacity sufficient to
withstand telehandler weight. Refer to the serial
plate of the telehandler for specific weight.
position.
71.5"
SJ643 TH
80.2''
SJ843 TH
Figure 55 Center of gravity
Figure 56 Lifting points
Lifting Skyjack SJ643 TH & SJ843 TH
WARNING
4. Properly adjust rigging to ensure telehandler
remains level during lifting. See Center of gravity
location.
Lifting Point
SJ643 TH & SJ843 TH