Optional Attachments; Side Tilt Carriage; Swing Carriage - Skyjack SJ643 TH Operating Manual

Optional Attachments

3.6 Optional Attachments
The Skyjack TH series telehandler is designed
to accept a variety of optional "Quick Attach"
attachments aside from regular fork carriage
attachment.

3.6-1 Side Tilt Carriage

Figure 10 Side Tilt Carriage
The side tilt carriage allows carriage to tilt to either
side.
Installation Procedure
1. Remove fork attachment or other attachment
from boom and connect side tilt carriage
attachment (refer to Section 5.13-1
5.13-2).
Operation
1. Ensure the side tilt carriage attachment is
positioned perpendicular to the load.
2. To operate using the Standard Multi-functional
Joystick:
To tilt carriage left, hold left auxiliary function
▪
button down.
To tilt carriage right hold right auxiliary function
▪
button down.
3. To operate using the Premium Multi-functional
Joystick (if equipped):
To tilt carriage left, hold auxiliary function
▪
switch up.
To tilt carriage right, hold auxiliary function
▪
switch down.
4. Handle load the same as regular fork carriage
attachment (refer to Section 5.8
5.9).
SJ643 TH & SJ843 TH

3.6-2 Swing Carriage

Swing carriage allows forks to swing left or right,
reducing the needed turn angle of telehandler when
placing loads. This is used for maneuvering loads in
tight locations.
Installation Procedure
1. Remove fork attachment or other attachment
Section
and
2. Connect auxiliary hydraulic hoses to swing
Operation
1. Using optional attachment controller, ensure
2. To operate using the Standard Multi-functional
3. To operate using the Premium Multi-functional
Section
and
4. Handle load the same as regular fork attachment
Figure 11 Swing Carriage
from boom and connect swing carriage
attachment (refer to Section 5.13-1
5.13-2).
carriage attachment cylinders.
the swing carriage attachment is positioned
perpendicular to the load.
Joystick:
To swing carriage left, hold left auxiliary
▪
function button down.
To swing carriage right hold right auxiliary
▪
function button down.
Joystick (if equipped):
To swing carriage left, hold auxiliary function
▪
switch up.
To swing carriage right, hold auxiliary function
▪
switch down.
Section 5.8 Section
(refer to and
Section 3 – Familiarization
Section
and
5.9).
216201ADA
33