Deutz Engine Data Display Module; Function Buttons; Contrast & Illumination Settings; Engine Main Display - Skyjack SJ643 TH Operating Manual

Section 5 – Operation
5.11 DEUTZ Engine Data
Display Module
The DEUTZ Display combines a graphic LCD display
with five function buttons at the bottom of the screen
(see Figure 27).
1

Function buttons

Figure 27 Engine Data Display Module
5.11-1 Function Buttons
1. Pressing any button calls up the main buttons
menu.
2. The positioning of the symbols above the
relevant button allows the button function to
be changed. The buttons correspond to the
following functions:
1 2
Figure 28 Main Buttons Menu

Engine Main Display

1
Quad Display
2
Graphic Display
3
Error Messages
4
Exit
5
5.11-2 Contrast & Illumination Settings
1. Pressing button 5 calls up the Contrast and
Illumination menu when the menu symbols are
not displayed.
216201ADA
62
4 5
2 3
3 4 5
2. Adjust illumination using button 1 for dimming
or button 2 for brightening the illumination.
Figure 29 Setting Screen Illumination
3. Adjust contrast by using button 3 to decrease
contrast and button 4 to increase the contrast.
Figure 30 Setting Screen Contrast
5.11-3 Engine Main Display
1. To show the engine main display, press any
button to display the menu symbols, then press
button 1.
Figure 31 Main Screen
2. The top window shows two scales: engine RPM
and coolant level. The bottom left window shows
the instantaneous fuel consumption while the
right window shows the coolant temperature.
3. Pressing button 1 repeatedly, will display
various parameters such as; fuel consumption,
average fuel consumption per route and
operating hours per route traveled.

DEUTZ Engine Data Display Module

SJ643 TH & SJ843 TH