Back-Up Sensor/Camera With Monitor (If Equipped) - Skyjack SJ643 TH Operating Manual

Section 3 – Familiarization
3.5-7 Back-up Sensor/Camera with
Monitor (If Equipped)
The back-up monitor is mounted on the dash inside
the cab and operational when the key switch is in on
position. When active, the monitor displays the area
behind the telehandler. A green status symbol
indicates the sensor and camera are connected and
no objects are detected.
When in reverse and objects are detected, the monitor
beeps, the status symbol turns red, and range
indicate distance to the objects. As
symbols
2
objects become closer the range symbols increase
in number and change to red. Five symbols indicate
immediate proximity.
Figure 09 Back-up Monitor and Symbols
Back-up Monitor
1
Range Indicator symbols
2
Sensor/Camera status symbol
3
216201ADA
32
3
2 3
1
Optional Equipment
SJ643 TH & SJ843 TH