Skyjack SJ643 TH Operating Manual page 41

Visual & Daily Maintenance Inspections
13
Engine Intake Air Filter
10
Ensure there are no loose or missing parts and
▪
there is no visible damage.
Ensure air cleaner vaccuator valve
▪
from dirt or dust by squeezing the valve lips.
Check air cleaner service indicator
▪
replace filter element if needed.
Fuel Tank
13
IMPORTANT
Before using your telehandler ensure there is
enough fuel for expected use.
Ensure fuel filler cap is secure.
▪
Ensure tank shows no visible damage and no
▪
evidence of fuel leakage.
Fuel Leaks: Failure to detect and correct fuel
▪
leaks will result in an unsafe condition. An
explosion or fuel fire may cause death or serious
injury. Perform a visual inspection around the
following areas:
hoses and fittings
▪
fuel pump
▪
fuel filter
▪
fuel tank
▪
WARNING
Engine fuels are combustible. Inspect the
telehandler in an open, well-ventilated area away
from heaters, sparks and flames. Always have an
approved fire extinguisher within easy reach.
SJ643 TH & SJ843 TH
14 15
11
is free
11
and
12
10
Hydraulic Oil Tank
14
Ensure hydraulic filler cap is secure.
▪
Ensure tank shows no visible damage and no
▪
evidence of hydraulic oil leakage.
Hydraulic Oil
15
Be sure that the boom is in the lowered and
▪
stowed position, and then visually inspect the
sight gauge located at the rear of the hydraulic
oil tank.
Add fresh, clean hydraulic oil as required.
▪
Refer to Section 7.4
Section 4 – Pre-operation
Right Side
12
for recommended oil type.
216201ADA
41