7.5
PROPANE FUEL FILTER REPLACEMENT (GM ENGINE)
Removal
1. Relieve the propane fuel system pressure. Refer to Propane
Fuel System Pressure Relief.
2. Disconnect the negative battery cable.
3. Slowly loosen the Filter housing and remove it.
4. Pull the filter housing from the Electric lock off assembly.
5. Remove the filter from the housing.
6. Locate Filter magnet and remove it.
7. Remove and discard the housing seal.
8. If equipped, remove and discard the retaining bolt seal.
9. Remove and discard mounting plate to lock off O-ring seal.
3121658
SECTION 7 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
1
6
10
7
2
8
3
4
9
1. Electric Lock Off Solenoid
6. Fuel Outlet
2. Housing Seal
7. O-ring
3. Filter Magnet
8. Filter
4. Filter Housing
9. Fuel Inlet
5. Electrical Connector
10. Ring
Figure 7-13. GM Filter Lock Assembly
5
7-37