Ground Control Indicator Panel - JLG 450A Operation And Safety Manual

SECTION 3 - MACHINE CONTROLS AND INDICATORS

Ground Control Indicator Panel

(See Figure 3-3., Ground Control Indicator Panel)
1. Battery Malfunction Indicator
Indicates a problem in the battery or charging
circuit, and service is required.
2. Low Engine Oil Pressure Indicator
Indicates that engine oil pressure is below nor-
mal and service is required.
3. High Engine Temperature Indicator
Indicates that engine coolant temperature is
abnormally high and service is required.
4. Engine Oil Temperature Indicator (Deutz)
Indicates that the temperature of the engine
oil, which also serves as engine coolant, is
abnormally high and service is required.
3-8
5. Engine Malfunction/Check Engine Indicator
Indicates that engine oil pressure is below nor-
mal or engine coolant temperature is abnor-
mally high and service is required.
6. Low Fuel Level Indicator
Indicates the fuel level is low. The Fuel
Reserve/Cut-Out System will shut the engine
down (or allow it start and run for an addi-
tional minute, depending upon machine setup) before the
fuel tank is emptied.
7. Glow Plug Indicator
Indicates the glow plugs are operating. After
turning on ignition, wait until light goes out
before cranking engine.
3121658