Safety Precautions; Preparation And Inspection; Operation; Skywelder - JLG 450A Operation And Safety Manual

SECTION 6 - ACCESSORIES

Safety Precautions

DO NOT OVERLOAD PLATFORM.
• Ensure no personnel are beneath platform.
• This factory-installed option is available only on specified
models.
• Keep lanyard attached at all times.
• Do not use electrical tools in water.
• Use correct voltage for tool being used.
• Do not overload circuit.

Preparation and Inspection

• Ensure generator is secure.
• Check condition of belt and wiring.

Operation

Start the engine, then turn on the generator.
See the Miller Generator Technical Manual (PN 3121677) for more
information.
6-8
6.5

SKYWELDER™

SkyWelder™ is capable of TIG and Stick welding, producing 200
Amps at 100% duty cycle or 250 Amps at 50% duty cycle. It
receives power from the SkyPower™ system.
3121658