Verify The Installation - Keysight Technologies N9000B Installation Note

25 MHz or 40 MHz Analysis Bandwidth Installation Kit
Figure 1 USB Storage Device Configuration Menu
7. The signal analyzer will automatically consume the License File. (This may take a few minutes)
When the License File is consumed the Keysight License Manager will display a "Successful
License Installation" message similar to the one shown in
Figure 2 Successful License Installation
Alternate Installation Procedure
The License File can be manually installed over USB or LAN by placing the license file in the
following folder on the signal analyzer
C:\Program Files\Agilent\licensing

Verify the Installation

1. Cycle power on the signal analyzer.
2. Press System, Show System to display a list of installed options.
3. Verify that the newly installed option number(s) appears on the list.
6
Figure 2.
Installation Note N9030-90074