Advertisement
Option FS2, Enhanced Fast Sweep Speed Upgrade
7. The signal analyzer will automatically consume the License File. (This may take a few minutes)
When the License File is consumed the Keysight License Manager will display a "Successful
License Installation" message as shown in
licenses, multiple "Successful License Installation" messages will appear. Wait until all
licenses have been consumed before removing the USB storage device.
Figure 2
Successful License Installation
Verify the License Installation
1. Before the licenses will be recognized, the XSA application must be restarted. Press File, Exit.
An Exit Analyzer dialog box will appear; press Enter to confirm the exit.
2. Double-click on the LaunchXSA icon on the Windows desktop. Wait for the XSA application to
finish starting (the analyzer should be sweeping). If the analyzer is sweeping continue to
step
6.
3. If during the boot-up process, the instrument displays the window shown in
the instrument also has N90x0A-TDS and N6141A-2FP/2TP licensed.
In
step 3
on
page
6, you should have placed check marks next to these two option designators.
The window is displayed because one of the FPGAs (Field Programmable Gate Arrays) inside
the instrument does not have enough capacity to contain the FPGA images for both the Option
FS2, Enhanced Sweep Speed, and Option TDS, Time Domain Scan (TDS used with EMC
Application N6141A).
Notice near the bottom of the window, the Currently Loaded FPGA is displayed, and for this
example, the Time Domain Scan is loaded. Do not confuse this with the Selected FPGA
description that appears in the box, since the Selected FPGA entry can be used to choose what
FPGA is about to be loaded, if you decide to load the other FPGA selection.
At this point you need to decide whether you want the instrument to replace the FPGA image
that will enable the newly installed Enhanced Sweep Speed, or you want to continue using the
currently installed Time Domain Scan to make EMI measurements.
4. Keysight Service centers installing this kit for customers will want to enable Enhanced Sweep
Speed since Option FS2 was ordered.
Notice the Load FPGA button in the window is grayed out until you choose to load the other
FPGA image.
8
Figure
2. Since the license file contains multiple
Figure
3, it means
Installation Note N9040-90043
Advertisement
