Verify The Installation - Keysight Technologies N9041B Installation Note

Alternate Installation Procedure
The License File can be manually installed over USB or LAN by placing the license file in the
following folder on the signal analyzer
C:\Program Files\Agilent\licensing

Verify the Installation

1. Cycle the power on the signal analyzer.
2. Press System, Show System to display a list of installed options.
3. Verify that the newly installed option, N9041B-EDC, External Digitizer Control, appears on the
list.
4. Verify that Option N9041B-CRW also appears. this assures Option CRW is installed since
Option EDC requires Option CRW.
For assistance, contact your nearest Keysight Technologies Sales and Service Office. To find your
local Keysight office access the following URL, or if in the United States, call the following
telephone number:
http://www.keysight.com/find/assist
1-800-829-4444 (8 am - 8 pm ET, Monday - Friday)
Installation Note N9041-90008
Option EDC Upgrade
7