Verify Hardware Installation - Keysight Technologies N9020A Installation Note

Signal analyzer

Hide thumbs Also See for N9020A:

Verify Hardware Installation

1. Turn on the analyzer and wait for the instrument to fully boot up.

2. Verify the spectrum analyzer application loads and sweeps as expected. Press System, Show,

Hard ware on the analyzer and verify that the Main board and the

themselves as:

— BBIQ

— BBIQ Interface

Licensing the Option

Installation Procedure over USB

1. Locate the Option Upgrade Entitlement Certificate (5964-5178) from the kit.

2. Redeem the Option Upgrade Entitlement Certificate by following the instructions on the

Certificate.

3. After redeeming your Option Upgrade Entitlement Certificate you will receive an email with an

attached License File.

4. Locate a USB storage device. Perform a virus scan on this device before use.

5. Save the License File to the root directory of the USB storage device.

6. Connect the USB storage device to one of the MXA USB port. Windows will detect the new

hardware and may display the configuration menu shown in

configured according to your preferences.

Figure 38

USB Storage Device Configuration Menu

Installation Note N9020-90189

Option BBA, Analog Baseband I/Q Inputs Retrofit Kit

Figure

BBIQ Interface Board

38. This menu may be

identify

Table of Contents