Mechanical Position Indication Via Indicator Mark - AUMA SQ Series Operation Instructions Manual

Indications
Characteristics
7.5.

Mechanical position indication via indicator mark

Characteristics
48
SQ 05.2 SQ 14.2 / SQR 05.2
Independent of power supply
Used as running indication: Indicator disc (with arrow
ator operation and continuously indicates the valve position
(For "clockwise closing version", the arrow rotates in clockwise direction for
operation in direction CLOSE)
Indicates that end positions (OPEN/CLOSED) have been reached
Arrow points to symbol
Self-adjusting when increasing the swing angle
Figure 57: Mechanical position indicator
[1] End position OPEN reached
[2] End position CLOSED reached
[3] Indicator mark at cover
Independent of power supply
Used as running indication: Indicator disc rotates during actuator operation and
continuously indicates the valve position
(For "clockwise closing version", the symbols
direction for operation in direction CLOSE)
Indicates that end positions (OPEN/CLOSED) have been reached
(Symbols (OPEN)/
SQR 14.2 Control unit: electronic (MWG)
AC 01.2 Non-Intrusive Profinet
(OPEN) or (CLOSED)
/
(CLOSED) point to the indicator mark
) rotates during actu-
rotate in counterclockwise
at cover)