Transport, Storage And Packaging; Transport - AUMA SQ Series Operation Instructions Manual

Transport, storage and packaging

3. Transport, storage and packaging
3.1.

Transport

12
SQ 05.2 SQ 14.2 / SQR 05.2
For transport to place of installation, use sturdy packaging.
Hovering load!
Risk of death or serious injury.
Do NOT stand below hovering load.
Attach ropes or hooks for the purpose of lifting by hoist only to housing and NOT
to handwheel.
Actuators mounted on valves: Attach ropes or hooks for the purpose of lifting
by hoist to valve and NOT to actuator.
Actuators mounted to gearboxes: Attach ropes or hooks for the purpose of lifting
by hoist only to the gearbox using eyebolts and NOT to the actuator.
Actuators mounted to controls: Attach ropes or hooks for the purpose of lifting
by hoist only to the actuator and NOT to the controls.
Respect total weight of combination (actuator, actuator controls, gearbox, valve)
Secure load against falling down, sliding or tilting.
Perform lift trial at low height to eliminate any potential danger e.g. by tilting.
Figure 7: Example: Lifting the actuator
Table 4:
Weight for AC 01.2 actuator controls
with electrical connection type:
AUMA plug/socket connector with screw-type connection
SQR 14.2 Control unit: electronic (MWG)
AC 01.2 Non-Intrusive Profinet
Weight approx. [kg]
7