Electrical connection
5.2.6.
Fieldbus terminal compartment: close
30
SQ 05.2
SQ 14.2 / SQR 05.2
Figure 23: Close fieldbus terminal compartment
[1]
Cover (fieldbus terminal compartment)
[2]
Screws for cover
[3]
O-ring
[4]
Cable glands for fieldbus cables
[5]
Blanking plug
1.
Clean sealing faces of cover [1] and housing.
2.
Apply a thin film of non-acidic grease (e.g. petroleum jelly) to the sealing faces.
3.
Check whether O-ring [3] is in good condition, correctly insert O-ring.
4.
Fit cover [1] and fasten screws [2] evenly crosswise.
5.
Fasten cable glands and blanking plugs applying the specified torque to ensure
the required enclosure protection.
SQR 14.2 Control unit: electronic (MWG)
AC 01.2 Non-Intrusive Profinet