Fieldbus Terminal Compartment: Open - AUMA SQ Series Operation Instructions Manual

SQ 05.2 SQ 14.2 / SQR 05.2
AC 01.2 Non-Intrusive Profinet
5.2.4.

Fieldbus terminal compartment: open

SQR 14.2 Control unit: electronic (MWG)
Figure 20: Open cover to fieldbus terminal compartment
[1] Cover (fieldbus terminal compartment)
[2] Screws for cover
[3] O-ring
[4] Cable entries for fieldbus cables
[5] Blanking plug
Hazardous voltage!
Risk of electric shock.
Disconnect device from the mains before opening.
Electrostatic discharge ESD!
Risk of damage to electronic components.
Earth both operators and devices.
1. Loosen screws [2] and remove cover [1].
2. Insert cable glands suitable for fieldbus cables.
The enclosure protection IP... stated on the name plate is only ensured if suit-
able cable glands are used.
Figure 21: Example: Name plate for enclosure protection IP68
3. Seal unused cable entries with suitable plugs.
Electrical connection
27