Error Codes - Eagle Eye SLB Series User Manual

Error Codes

Category
File operation
Parallel
communication
Extension
communication
Parameter setting Set Error
Find Quality Products Online at:
Title Error details and possible causes
File exist The USB has the file with the same name
Open err
Not USB
Create file err
Save file err
Save alloc err
Save Error
Version Error
Memory Full
Set paral load fail
load failure
Load Total U too high
Total batteries voltage
inconformity
DAC error
Coefficient Error
Total U too high
U low
GlobalTestSupply
www.
Unable to open the file in the USB
Unable to identify USB
Create file unsuccessful to the USB
Save file unsuccessful to the USB
The USB's FAT operation failed
The native file save error, file length etc.
The current version cannot view the native storage file.
Version without grouping cannot view the storage data
files with grouping version. Vice versa.
The native storage space is not enough to store the
setting time data file as discreet value
The discharge communication between the loads failed
Communication before discharging with the load failed
and/or parameter setting is incorrect or met
Detected total voltage of load before discharge is greater
than the maximum voltage limit
Detected total voltage of load before discharge is not in
the host's current selected voltage type
communication with the Com Terminal failed
parameter setting value and save values are not
consistent.
Calibration coefficient of deviation is too large
Detected before discharge total voltage is greater than
the maximum voltage limit
Total voltage detected before discharge is less than the
total end voltage value parameter setting
.com
SLB-Series User Manual
42
sales@GlobalTestSupply.com