Dac Connection To 2V/1.2V Cells - Eagle Eye SLB Series User Manual

Custom DAC kits are available upon request, the most common being 1.2V or 4V applications.
NOTE: For all DAC connections, the first DAC must be connected to the most negative post of the
battery string regardless of whether or not the battery string is numbered from positive to negative or
negative to positive.
DAC test leads have a set sequence in which they need to be connected to the batteries. Each
DAC has (2) serial cables (red & black) and each cable has numbered test leads. The leads are
numbered as (0) for the negative lead followed by (1, 2, 3 ...) and so on for each positive lead.

DAC Connection to 2V/1.2V Cells:

• For 2V/1.2V cells, use 7-Lead DAC cables
• Start with DAC cable #1 (red serial connector)
• Connect the black alligator clip (labeled 0) to the most negative post of the battery string
• Connect the red alligator clips (each labeled) to the next (6) positive posts
• Next use DAC cable #2 (black serial connector)
• Connect the black alligator clip (labeled 0) to the next negative post following the previous
positive cell connection
• Connect the red alligator clips (each labeled) to the next (6) positive posts
• Repeat connection pattern for additional DAC's
Find Quality Products Online at:
GlobalTestSupply
www.
SLB-Series User Manual
.com
sales@GlobalTestSupply.com
15