Discharge Testing
The following section covers steps for performing a discharge test. For an additional tutorial of
the SLB-Series menu, please visit our tutorial video
Battery String Discharge
Using the keypad and LCD display, press the arrow keys up/down to highlight [Discharge] and
press ENT to open the discharge test parameter screen.
Discharge Test Parameters
There are four system parameters to set for a discharge test. These settings vary slightly
depending on whether or not the test will include the use of DACs.
Use the left/right arrow keys to adjust the following values:
[Strg type]: Refers to the total voltage of the battery string/system
[Cell type]: Refers to the nominal cell voltage
[Cell No.]: Refers to the number of cells in the battery string,
value to "0"
[DIS I]: Refers to the working current to be applied to the system
After setting the discharge parameters, press the down arrow key to progress to the next
screen.
Find Quality Products Online at:
Battery DIS
DIS test
Continued DIS
Paral load
Discharge Menu
Strg type: 48V
Cell type: 12V
Cell No.: 4
DIS I: 000.0 A
Discharge Parameters
GlobalTestSupply
www.
SLB-Series User Manual
SLB Menu Walkthrough
Cell
if not using DAC set this
.com
27
sales@GlobalTestSupply.com