Dac Test Leads Explained - Eagle Eye SLB Series User Manual

About the DACs: Each DAC is powered by 8VDC from the batteries it is connected to. It attains
this from the first 9 connections (7-lead harness) or first connection (3-lead harness). For cable
management magnetic bolts are built into the bottom of DAC for attachment to metal surfaces.
Each DAC has (2) serial ports for connection with test lead cables. These (2) ports are labeled
with "1" and "2" which are connected with red (#1) and black (#2) connectors of DAC cable
harnesses.

DAC Test Leads Explained

All standard models of SLB-Series DAC's can test batteries of 1.2V, 2V, 6V, and 12V cells (1.2V
users may need to purchase extra DACs). The DAC kits come with two types of cable harnesses,
3-lead and 7-lead. The 7-lead cable contains (6) red leads and (1) black lead and is used for
testing 1.2V (NiCad) or 2V cells. The 3-lead cables contain (2) red leads and (1) black lead and
are used to test 6V and 12V cells. Both cable types connect to the battery system and DAC in the
same way.
7-lead, (1) black and (6) red for testing 1.2V or 2V cells
One cable connects to (6) cells; One DAC connects to (12)
cells
Note: It is important to remember that each DAC has (2) serial ports labeled "1" and "2". The red
test lead cable plugs into port "1" and the black test lead cable plugs into port "2".
Find Quality Products Online at:
GlobalTestSupply
www.
SLB-Series User Manual
3-lead, (1) black and (2) red for testing 6V or 12V jars/cells;
One cable connects to (2) cells; One DAC connects to (4)
cells
.com
sales@GlobalTestSupply.com
14