Dac Workflow Connection To 6V/12V Cells - Eagle Eye SLB Series User Manual

SLB-Series User Manual
48V System - 2V Cells - 24 Jars
125V System, 2V cells, 60 Units

DAC Workflow Connection to 6V/12V Cells:

• For 6V/12V cells, use 3-Lead DAC cables
• Start with DAC cable #1 (red serial connector)
• Connect the black alligator clip (labeled 0) to the most negative post of the battery string
• Connect the red alligator clips (each labeled 1 & 2) to the next (2) positive posts
• Next use DAC cable #2 (black serial connector)
• Connect the black alligator clip (labeled 0) to the negative post after the previous cell connection
• Connect the red alligator clips (each labeled 3 & 4) to the next (2) positive posts
• Repeat connection pattern for additional DAC's
GlobalTestSupply
16
www. .com
Find Quality Products Online at: sales@GlobalTestSupply.com