Programming Functions; The Following Instructions Apply To All Programming Functions; To Access The Programming Mode; Saving To Memory And Exiting The Programming Mode - Miele Laboratory Glassware Washer G 7883 Operating And Installation Instructions

Programming functions

For future servicing, be sure to document any changes made to the factory
settings in the fields provided.
General information:
– Program selector positions that have no assigned function are represented by a
bar ( - ) in the middle of the display.
– To call up the programming level, use the f position.
The status E.. will appear in the display.

The following instructions apply to all programming functions:

To access the programming mode

^ Turn the program selector to f.
^ Turn off the machine.
^ Simultaneously press and hold the
and "Start" 6 buttons,
"Display"
while turning on the machine by
pressing the On/Off button.

Saving to memory and exiting the programming mode

^ Press the "Start" 6 button.
^ Press the "Start" 6 button again.

Exiting the programming mode without saving

^ Press the On/Off button to turn off
the machine.
34
The current program status P..
appears in the display. The Fill/Drain
indicator lights.
SP appears in the display.
The change will now be stored in the
memory.
The change is canceled.