Installation - Miele G 8066 Operating Instructions Manual

Installation options
– Free-standing
– Undercounter
The machine can be installed under a
continuous counter or sink drain. The
recess must be at least 23
5
wide, 23 / " (60 cm) deep and 32
8
(82 cm) high.

Installation

,
Furniture and fittings installed
near the machine must be of a
commercial standard (able to
withstand the effects of steam) (e.g.
stainless steel).
^ Please refer to the installation
diagram supplied with the machine.
Leveling the machine
^ The dishwasher needs to stand even.
It can be leveled with the four height
adjustable feet.
Positioning and securing the
machine
To ensure stability for undercounter
installations, the machine must be
aligned and screwed to the counter.
^ Open the door.
5
/ " (60 cm)
8
1
/ " ^ Secure the machine to the front edge
4
^ When not mounted undercounter,
Steam Deflector
Depending on the requirements for an
undercounter installation, a steam
deflector can be ordered from the Miele
Technical Service Department.
The underside of the countertop is
protected from steam damage by this
stainless steel plate.
of the countertop using screws to the
left and right of the front trim.
floor mounting brackets must be
used.
Do not use silicone sealant to seal
the gaps between the machine and
any neighboring units.
Installation
57