Table of Contents
Advertisement
For future servicing work, please
document any alterations to the stan-
dard factory settings.
Enter any alterations in the field
Value set:_________.
General notes:
– Switch positions that have not been
allocated a function are indicated in
the middle part of the display by a
-
bar (
).
– The programming level is called up
via the STOP position f .
– A number of
can be altered.
Settings and alterations to global
parameters (setting concentration
levels for DOS 1)
is found.
Setting and altering programme
specific parameters (Wash/Rinse
temperatures and temperature
holding times: Main wash and Final
rinse)
in which this parameter
is found.
in which the parameter
^ Turn the programme selector to STOP
f.
^ Switch off the machine.
^ Press and hold ß and 6 at the
same time, and whilst doing so,
switch the machine on with the
button.
The current programme status "P..."
will appear in the display and the p /
6 indicator light will come on.
^ Press 0 twice, E02 for programming
and
level 2 will appear in the display.
33
Advertisement
Table of Contents
