Adding rinse aid
G 8066 WES DOS
This model comes standard with a
built-in dispensing pump and a
reservoir for rinse aid.
The reservoir is located on the inner
right hand side of the service panel and
holds approximately 8.5 oz (250 ml).
^ Open the service panel with the
handle.
^ Take the red cap off the filler spout.
^ Using the supplied funnel fill the
container with rinse aid.
^ Replace the cap and close the ser-
vice panel.
22
Add rinse aid indicator
^ Fill the rinse aid reservoir when the
slot on the right hand side of the
service panel shows insufficient rinse
aid.