Miele G 8066 Operating Instructions Manual page 38

Programming special functions
2.3 Venting the dispensing system
^ Select programming level 3.
^ Press z until 3.03 is displayed.
^ Press A. The display shows do2.
^ Press the A button.
The dispensing system will be vented
automatically. 0 will appear in the
display when the venting process is
complete.
If you do not want to make any other
setting changes in this programming
level, proceed to step 2.4.
38
2.4 To save your changes
^ Press the 6 button. The display
shows SP.
^ Press the 6 button again. The
change has been saved.
^ Turn the machine off with the
Z button.