Miele G 8066 Operating Instructions Manual page 19

If the machine is used afterwards
^ Press one of the program buttons.
Any traces of salt are diluted and rinsed
away. The display shows the time
remaining until the end of the rinse. The
dispay shows the time period until the
machine can be used again.
After the rinse process has begun,
there may be a pause for a few
minutes while the water softener is
regenerated.
If the boiler and tank are filled and the
operating temperature has been
reached, the wash time of the selected
program will be shown in minutes.
Once complete the machine is ready
for operation.
Water softener (WES) (optional)
Starting the rinsing process
manually
If you refill the regeneration salt and do
not immediately start a new wash
program, e.g. in the evening, the rinse
cycle does not start automatically,
therefore salt residue may remain in the
machine. Rinse out the salt residue by
manually starting the rinse cycle.
^ Press the Z button.
^ Press and hold the 6 button and
press Y at the same time.
Any traces of salt are diluted and rinsed
away.
– The "Start" indicator lights.
– The "Drain" indicator lights.
– A dot is displayed during the
manually started rinse cycle.
After rinsing
– the "Start" indicator goes out.
– the "Drain" indicator lights.
– the display shows 0.
The machine can be turned off.
If the door is opened before switching
the machine off, all program buttons will
light. A program can be selected (see
"Preparing the dishwasher").
19