Frequently Asked Questions; Technical Faults - Miele G 8066 Operating Instructions Manual

Frequently asked questions

With the aid of the following guide, minor problems can be fixed without a service call.
Repairs should only be carried out by Miele Service in accordance with local
and national safety regulations. Unauthorized repairs could cause personal
injury or machine damage.

Technical faults

Issue
Dishwasher does not
start
Dishwasher stops
during a program
A few minutes after
starting a program, the
p indicator flashes
(fault code F..E
appears in the display)
50
Possible fault
The door is not properly
closed.
The machine is not
plugged in.
The fuse has tripped.
The fuse has tripped.
The door is not properly
closed.
The water supply is
closed.
The water inlet filter is
clogged.
The waterproof system has
activated.
The water pressure at the
water inlet is lower that
14.5 psi.
Solution
Close the door firmly.
Insert the plug.
Reset the circuit breaker.
Reset the circuit breaker.
See the data plate for
minimum Ampere.
Close the door firmly.
Open the water supply.
Before fixing the fault:
– Turn the machine off
with the Z button.
Then:
– Clean the water inlet
filter, see "Cleaning and
Care".
Call the Miele Technical
Service Department.
Consult a plumber.