Selecting A Program; Starting A Program; At The End Of A Program - Miele G 8066 Operating Instructions Manual

Use

Selecting a program

^ Choose the program according to the
items being cleaned and the degree
of soiling.
See the "Program guide" for more
information.
The selected program will remain in
memory for the duration of the
operating session, e.g. through the
workday, until the machine is turned off.

Starting a program

^ Press the "Start" 6 button.
The "Start" and "Program" indicators
light.
During the running program the
remaining time shows in the display.
The "min" indicator lights.
Pressing the Program button during the
program run will change the display
between the current temperature in the
wash cabinet and boiler in short
intervals. After approximately 2
seconds the display shows the
remaining time again.
30

At the end of a program

0 will appear in the display at the end of
a program.
See "Programming special functions" to
activate the buzzer at the end of a
program.
^ Open the door and unload the
machine.
G 8066 WES DOS
The k indicator will be displayed,
when the automatic reactivation
program is in progress. You can still
start a program during reactivation.
If you open the door at the end of the
program, the remaining time for
reactivation flashes in the display.
A new program start can be selected
by pressing the 6 "Start" button. The
program will start automatically once
the reactivation program has
completed.