Setting The Main Wash Or Final Rinse Temperature And/Or Final Rinse Duration (Programming Level 4) - Miele G 8066 Operating Instructions Manual

3. Setting the main wash or
final rinse temperature and/or
final rinse duration
(Programming level 4)
Any changes to the wash
temperature and/or the temperature
holding time should be recorded in
the appropriate section of the
"Program guide".
The factory default settings for the main
wash and final rinse temperatures and
for the final rinse duration are given in
the "Program guide".
A main wash temperature of 68 - 149 °F
(20 °C - 65 °C) can be set in
Programming level 4. The final rinse
temperature depends on the wash
temperature and is by standard 68°F
(20 °C) above the wash temperature
(Offset). It can be altered to a range of
59°F to 77°F (15 °C to 25 °C).
The final rinse duration for all wash
programs can be set between 3 and
10 seconds.
For applications where high
temperature sanitizing is required
according to Provincial Food Code,
only use a minimum temperature of
82°C with a holding time of 10
seconds.
Programming special functions
Accessing programming level 4
^ Turn the machine off by pressing Z.
^ Press and hold the A and 6 button
and at the same time turn the
machine on with the main switch Y.
The display shows the current
program status P....
The p indicator lights.
^ Press the y button 4 times. The
display shows 4 (programming
level 4).
3.1 Setting the main wash
temperature
^ Press z until 4.01 is displayed.
^ Press A once, the display shows
the current setting 65. The machine
is factory set to 65 °C.
^ Press and hold A until the desired
value appears in the display.
If you do not want to make any other
setting changes in this programming
level, proceed to step 3.4.
39