Water softener (WES) (optional)
Add salt indicator k
The k indicator light is on when there is
insufficient regeneration salt in the salt
reservoir.
If the k indicator light is on, you have
five remaining wash cycles before
regeneration salt must be refilled.
20
Regeneration of the water
softener
The water softener reactivates
automatically and takes approx. 10
minutes.
The k indicator lights during the
reactivation process.
When this indicator light is on, another
wash cycle can be started (see
"Preparing the dishwasher"). After that
wash cycle, the remaining regeneration
time (in minutes) flashes. A further wash
cycle cannot be started during
regeneration.
The number of remaining wash
cycles until the next regeneration
can be displayed. Miele Service can
activate that function for the G 8066.
The number of remaining wash cyles is
displayed when you:
– open/close the door,
– push the button of the active wash
program.