Miele G 8066 Operating Instructions Manual page 40

Programming special functions
3.2 Setting the offset range of the
final rinse temperature
^ Select programming level 4.
^ Press z until 4.02 is displayed.
^ Press A once, the display shows
the current setting 20. The machine is
factory set to 20 °C above the main
wash temperature.
It means, if the factory set wash
temperature is 65 °C, the final rinse
temperature is 85 °C.
^ Press the A button until the desired
temperature is displayed.
The final rinse temperature should
be set approximately 20 °C higher
than the main wash temperature. For
applications where high temperature
sanitizing is required according to
Provincial Food Code, only use a
minimum temperature of 82°C with a
holding time of 10 seconds.
If you do not want to make any other
setting changes in this programming
level, proceed to step 3.4.
40
3.3 Selecting the final rinse duration
^ Select programming level 4.
^ Press z until 4.03 is displayed.
^ Press A once, the display shows
the current setting 10. The display will
appear in tenths of a second. The
factory setting is 10 seconds.
^ Press and hold A until the desired
value appears in the display.
If you do not want to make any other
setting changes in this programming
level, proceed to step 3.4.
3.4 To save your changes
^ Press the 6 button. The display
shows SP.
^ Press the 6 button again. The
change has been saved.
^ Turn the machine off with the
Z button.