Before You Start (First Power Up); General Informations; Led Diode Indications - Salus HTR-RF(20) Full User Manual

4. Before you start (first power up)

4.1 General informations

For reference only. The illustration on the left (pictures below) explains the relationship between the temperature scale and the scale from
instructional sticker. It is useful in the configuration process or in case of a connection loss error. It is recommended to keep the sticker until installation
is complete.

4.2 LED diode indications

LED diode
10
Want to join network (Flashing
Joined the network successfully (constant flash of
*Pairing process complete (One quick flash of green diode)
Wiring Centre number selection OK (choice of 1 wiring centre - 1 blink of
second wiring centre - 2 blinks of
Wiring Centre group selection OK (choice of 1 group - 1 blink of
- 2 blinks of green diode as a confirmation, choice of no grouping - 1 blink of
group 1 - 2 blinks of green diode as a confirmation, etc.)
Wiring Centre zone selection OK (choice of 1 zone - 1 blink of
blinks of green diode as a confirmation, etc.)
Identify process ON (green diode is flashing sequently every 0,75 sec)
Lost connection with CO10RF / KL08RF / UGE600
Low battery (fast 3 red diode blinks every 10 seconds)
Pairing process failed (red diode flash for two seconds)
Error when trying to add two HTR-RF(20) to the same Wiring Centre Zone
alternately)
- Device reset (Orange diode flash for 1 second)
Description
RED 3 times in a row sequently, then 3.5s off, then again)
RED diode)
green diode as a confirmation, etc.)
green
green
(Red diode is flashing sequently every 0,5 sec)
green diode as a confirmation, choice of
diode as a confirmation, choice of second group
green diode as a confirmation, choice of
diode as a confirmation, choice of second zone - 2
(Red and green diodes are blinking