Battery Change; Factory Reset - Salus HTR-RF(20) Full User Manual

9. Battery change

10. Factory reset

48
1
Remove back cover.
✘
3
After inserting the batteries, the LED will turn on for 2 seconds.
paired, green colour = device is paired. To re-pair the device please refer to section 7.2.2.
1
5 sek.
Press SYNC button (back of the
thermostat) for 5 seconds.
2
Remove old batteries and insert new ones.
When done, place the thermostat on the
back cover that is attached to the wall.
Red colour = device not
2
After restoring factory settings, the
thermostat automatically enters
pairing mode for up to 2 minutes. In
pairing mode, the LED blinks
times in sequence.
✔
red 3