APPENDIX 1 SPECIFICATIONS
A1.2 Options
Option Name
Keyboard module
PCMCIA interface
board
NOTE:
Available from your nearest TOSHIBA TEC representative or TOSHIBA TEC Head Quarters.
A1.3 Media
Please make sure that the media to be used is approved by TOSHIBA TEC. The warranties do not apply to
problems caused by using media that is not approved by TOSHIBA TEC.
For information regarding TOSHIBA TEC-approved media, please contact a TOSHIBA TEC authorized service
representative.
A1.3.1 Media Type
This thermal transfer/direct thermal printer is specifically designed for label media. The table below shows the
size and shape of the media available for this printer.
Type
KB-80-QM
This module is an external intelligent keyboard unit,
including a 16 digit by 2 line LCD and 28 key
switches.
B-7708-PC-QM
This board enables the use of the following
PCMCIA cards:
LAN card: 3 COM EtherLink® III (recommended)
ATA card: Conforming to PC card ATA standard
Flash memory card: 4MB card (See page 2-13.)
Stop
E
position
C
Description
Black Mark
D
(on reverse side) Refer to
NOTE 3 below.
B
@
?
A1- 2
A
Feed Direction
EO1-33032
A1.2 Options
Source
See NOTE.
See NOTE.