Toshiba B-492L Owner's Manual page 39

Toshiba tec barcode printer owner's manual
Table of Contents

Advertisement

6. PRINTER OPERATION
6.2.2 Driver Installation
(Cont.)
NOTE:
Be sure to select the same printer
that you are going to install.
NOTE:
If you specify the same name as
already installed printer, that
printer will be overwritten.
When you desire to install the
same printer for many times,
change the printer name each
time.
If you selected the Local Printer in the previous step, go to Step 10.
If you selected the Network Printer in the previous step, go to Step 11.
10. When you selected the Local Printer in Step 9, select the PC port to
which this printer is connected.
11. When you selected the Network Printer in Step 9, enter a network
path, and click on the Next button. If the network path is unknown,
click on the Browse...button and select the same printer that you
chose in Step 8.
12. The screen will show the selected printer name. Change the printer
name, if necessary.
6- 4
EO1-33032
6.2 Installing the Printer Drivers

Advertisement

Table of Contents
loading

This manual is also suitable for:

R-th10Tec b-492l-th10 seriesTec b-492r-th10 series

Table of Contents