APPENDIX 4 SYSTEM MODE
A4.5 Printer Parameter
Fine Adjustment
(Cont.)
Back Feed Length Fine Adjustment
(Example)
NOTE:
The fine adjustment value
equals the sum of the fine
adjustment values set by the
PC command and this
parameter.
The maximum back feed length
fine adjustment value is
±9.5mm. When the addition of
the values reaches the
maximum, the value remains
unchanged even if subsequent
fine adjustments are made.
Back Feed Length Fine Adjustment
With this parameter you can fine adjust the Back Feed Length. With
"<3>ADJUST SET" displayed, press the [PAUSE] key 3 times.
[RESTART]
[FEED]
[FEED] key:
Pressing the [FEED] key once causes a –0.5mm
change, down to –9.5 mm.
[RESTART] key: Pressing the [RESTART] key once causes a
+0.5mm change, up to +9.5 mm.
After completing the fine adjustment, press the [PAUSE] key.
A4- 9
EO1-33032
A4.5 Printer Parameter Fine Adjustment