APPENDIX 1 SPECIFICATIONS
A1.2 Options
Option Name
AC Adapter Cover
Cutter module
Strip module
External media roll hanger B-EV904-PH-QM-R
NOTE:
The above options are available from your nearest TOSHIBA TEC representative or TOSHIBA TEC Head Quarters.
A1.3 Media
Please make sure that the media to be used is approved by TOSHIBA TEC. The warranties do not apply to
problems caused by using media that is not approved by TOSHIBA TEC.
For information regarding TOSHIBA TEC-approved media, please contact a TOSHIBA TEC authorised
representative.
A1.3.1 Media Type
The table below shows the size and shape of the media that can be used on this printer.
Type
B-EV904-AC-QM-R
B-EV204-F-QM-R
B-EV204-P-QM-R
B-EV904-H-QM-R
Black Mark
Label
(on reverse side)
Attached to the printer bottom for housing the AC
adapter.
A cutter unit that makes full cuts.
A cutter unit that makes partial cuts.
When attached to the front of the Media Outlet,
this module allows the on-demand strip issue by
detecting the presence or lack of a label.
When this option is attached to the printer, a
media roll with an outer roll diameter up to
203mm (8") and inner core diameter of 76.2mm
(3") can be used.
Cut position
Feed Direction
EA1- 3
ENGLISH VERSION EO1-33088
Description
Black Mark
Tag paper
(on reverse side)
A1.2 Options