SWT 3000 Equipment Manual
Slot and module identifier
An existing IFC module and its slot address are automatically recognized by the PU3 in the
SWT 3000 system.
A suitably configured ribbon cable. must be used for the slot identification function.
IFC-[x]-2
P5
IFC_SLOT
X41/1
IFC_SLOT_N
Figure 5:
Connection 1 to slot 2 is disconnected with the ribbon cable used.
*)
Figure 6:
The module type is recognized by the IFC controller through the different equipment of the mod-
ules and this is signaled to the PU3.
Figure 7:
© SIEMENS AG 2008
IFC Controller
*)
Principle of slot identification in the SWT 3000 system
IFC-2
Connection 1 to module slot 2 is disconnected
Ribbon cable for connecting the IFC modules to the PU3
IFC-[x]-2
CON
P5
TYPE
Option
Type identifier of the IFC modules.
Edition p3_3_2x 08/09
IFC-[x]-1
P5
IFC_SLOT
IFC Controller
X41/1
IFC_SLOT_N
26
IFC-1
*)
1
IFC-[x]-1
CON
P5
TYPE
TPibus
Interface Modules
PU3
GND
PU3
PU3
PU3CON
Page - 7