Siemens SWT-3000 Equipment Manual page 263

SWT 3000 Equipment Manual
RM in-band channel
In the case that no intranet or modems are available, the user can still monitor remote terminals
using the in-band RM channel. With the optional service "Remote Monitoring" (RM), data can be
transmitted between the devices of one or more SWT 3000 routes. The RM function enables the
user to have access via a serial interface with the service program to the following function:
Via an additional interface (service interface backplane SSB) up to 5 transmission routes can be
coupled.
Station 1
SWT 3000
Adr.1
SSF Front interface on the PU3
SSB Back interface
Figure 17:
Changing of the configuration and parameter (except date / time of the SWT 3000) in the remote
device is possible if the configuration via inband RM channel is activated (see figure below).
Figure 18:
© SIEMENS AG 2008
query of the device data (configuration, parameter, status) of the remote device
temporary adjustments (e.g. test loops)
producing a reset
Station 2
SWT 3000
Adr.2
Example of a route coupling with the RM function
Configuration via RM inband channel
Edition p3_3_2x 08/09
SNMP and Remote Access
Station 3....
SWT 3000 SWT 3000
Adr.3
coupling of two
SWT 3000 routes
Adr.4
Page - 23