Siemens SWT-3000 Equipment Manual page 79

SWT 3000 Equipment Manual
The system-2 configuration for the external SWT 3000 with FO connection to the PowerLink is
shown in the figure below:
Figure 25:
In this form is defined which slot position (iSWT-1 or iSWT-2) of the FOM in the PowerLink is used
for the configuration of the external SWT 3000.
The further settings like VF variant, must be executed via the PowerLink. In this case the same
settings from the external SWT 3000 must be defined in the system and system-2 configuration of
the (iSWT) PowerLink. The connection via FOM must be established.
Figure 26:
Due to the digital connection of the PU3f via the SSI it is in this case not possible to measure the
frequencies at the PU3f measuring jacks.
© SIEMENS AG 2008
SWT 3000 system-2 configuration for FO connection to the PowerLink
iSWT 3000 system-2 configuration for FO connection to the PowerLink
Edition p3_3_2x 08/09
Installation and Commissioning
System-2 settings in
the
connected via FOM
System-2 settings in
the PowerLink for the
SWT
FOM
external SWT
connected via
Page - 37